Open up your hips, hamstrings and adductors with the RDX Leg Stretcher—a simple, durable mobility tool designed to help you achieve deeper, safer stretches. Built from high-quality nylon webbing with premium Cordura®reinforcement, it holds position under tension while staying comfortable against the skin. SpongeX padding with a soft Dazzle fabric inner lining cushions the ankle/foot, and the hook-and-loop closure with high-quality elastic gives you a one-size, secure fit you can tweak in seconds.

Whether you’re a martial artist chasing higher kicks, a yogi working toward splits, or you just want to reduce tightnessfrom sitting or training, this strap helps you progress safely by letting you fine-tune length and leverage. Use it for PNF, static, and active mobility work before or after sessions—or on off days to speed recovery and improve range of motion.

Key features

• High-quality nylon strap for stable, controllable stretching

• Cordura® outer for resilience and long life

• SpongeX padding + Dazzle lining for comfort around foot/ankle

• Hook-and-loop closure + elastic for quick, one-size fit

• Helps increase flexibility, improve range of motion, and support better posture & movement quality

• Multi-sport ready: MMA, kickboxing, yoga, dance, football, general fitness

How to use (quick start)

1. Secure the padded loop around your foot/ankle; tighten the hook-and-loop.

2. Hold the free end(s) of the strap and slowly extend the leg, adjusting tension to your comfortable end range.

3. Breathe and hold 20–40 seconds (static) or perform gentle pulses/PNF (contract 5–6 sec, relax and ease deeper).

4. Repeat 2–3 rounds per side; progress gradually—no bouncing or pain.

Care

Wipe with a damp cloth and air-dry. Do not machine wash or tumble dry. Inspect stitching and hook-and-loop periodically.

Lift heavier, safer, and longer with the RDX Hook Strap Plus—gel-padded lifting straps engineered for serious strength work. The Shell Shock GEL lining cushions wrists against shock and pressure on heavy pulls, while Grip Flexdesign and a non-slip rubber strip keep the bar locked in so you can focus on the rep, not your grip. A moisture-wicking, anti-microbial fabric helps keep hands cool, dry and fresh, and the hook-and-strap closure makes it quick to dial in a secure, personalised fit.

Perfect for deadlifts, rows, shrugs, rack pulls, pulldowns and pull-ups, these straps add confidence when your forearms give out before your back or legs. Whether you’re chasing volume PRs or top-set singles, Hook Strap Plus reduces grip fatigue so your target muscles do the work.

Key features

• Shell Shock GEL padding to absorb shock and reduce wrist pressure

• Grip Flex architecture + rubberized strip for secure, non-slip hold

• Hook strap closure for fast, adjustable fit

• Moisture-wicking, anti-microbial fabric helps manage sweat & odour

• Built for bodybuilders, powerlifters and heavy trainers

How to use (quick start)

1. Thread the strap through the bar side and loop around once or twice.

2. Cinch the hook strap for a snug (not numbing) fit.

3. Keep wrists straight, pull the slack out, then lift with control.

4. Use on heavy sets or high-rep back work when grip becomes limiting.

Care

Air-dry after sessions. Hand-wipe with mild soap if needed. Do not machine wash/tumble dry. Inspect stitching/strap wear regularly.

Target your biceps (and keep momentum out of the lift) with the RDX T2 Arm Blaster—a classic “bicep bomber” re-engineered for durability and comfort. The rigid plate locks your upper arms in position so each curl loads the biceps instead of your shoulders or lower back. A heavy-duty nylon belt and iron-built plate shrug off serious training; neoprene padding at the neck and elbows keeps sessions comfortable; and perforations along the strap improve airflow when the gym heats up.

Why it works: by isolating the humerus close to the torso, the blaster reduces swinging and shoulder recruitment, helping you feel and control the biceps through the full ROM. Great for barbell curls, EZ curls, cable curls and even strict triceps pressdowns.

Key features

• Iron-built plate + nylon belt for long-term durability

• Neoprene neck & elbow pads for comfort and stability

• Perforated strap for breathability

• Ergonomic contour keeps arms and shoulders isolated

• Size & weight: 23(L) x 4(W) x 4(H); ≈1 kg

How to use (quick start)

1. Adjust strap so the plate rests comfortably across your upper abdomen/low chest.

2. Place elbows in the curved pads; keep them pinned through the set.

3. Curl under control—no swinging—squeeze at peak, lower slowly.

4. Aim for 8–15 reps, add load gradually, keep tension on the target muscle.

Care

Wipe down after training; air-dry fully. Do not machine wash or soak. Inspect rivets/strap periodically.

Built for heavy hitters, the RDX 6″ Leather Weightlifting Belt gives you extra-wide support without sacrificing comfort. Cut from oil-tanned Nubuck leather, the strap feels slightly gel-like when compressed—cushioning your torso as you brace—yet remains rigid enough to stabilise your spine under serious load. A contoured profile sits neatly between ribs and hips, while shock-absorbing construction spreads pressure evenly through the lower back and abdomen. Finished with reinforced stitching, rivets and a heavy-duty buckle, this belt is made to grind set after set.

Accreditation matters: this model is accredited by the Global Powerlifting Committee (GPC) and approved/recognised by the International Powerlifting League (IPL) & United States Powerlifting Association (USPA), so you can train with confidence and check federation rules if you plan to compete.

Why you’ll love it

• 6″ (≈15 cm) extra-wide back panel for maximum bracing surface.

• Nubuck leather: soft on the skin, supportive under load, long-lasting.

• Contoured design: secure fit with freedom to hinge and squat deep.

• Shock-absorbing core reduces hot spots and belt bite.

• Heavy buckle + rivets with double stitching for durability.

How it helps your lifts

A good belt doesn’t replace technique—it amplifies a strong brace. The wide panel and semi-rigid leather let you push your abs 360° against the belt, increasing intra-abdominal pressure and stabilising the spine for safer, stronger squats, pulls and presses.

Fit & sizing tips

Measure around your abdomen at the navel (where the belt sits), not your jeans size. If between sizes, choose the larger for more adjustment. Aim to have 2–3 holes either side of your usual setting. Leather will break-in and mould to you over the first few sessions.

Care

Wipe with a damp cloth after training; air-dry away from heat. Do not soak or machine wash. A light leather conditioner on the outside can help keep it supple.

FAQ

Is 6″ too wide for deadlifts?
Not for most lifters. The contour keeps the front comfortable while the wide back panel maximises support.

Dual-prong or single?
This model uses a heavy buckle with rivets (dual-prong feel in security). It’s fast to set and built to last.

Competition legal?
It’s GPC accredited and IPL/USPA approved/recognised. Always verify current federation specs for thickness/width before a meet.

How tight should it be?
Tight enough to draw a big breath and brace hard against—snug, not breath-stopping.

Will it stop back pain?
A belt is a performance aid, not medical treatment. If you have pain/injury, consult a professional.

Short description (WooCommerce)

Extra-wide 6″ Nubuck leather lifting belt with a contoured fit, shock-absorbing core and heavy buckle/rivets for rock-solid bracing on heavy squats, pulls and presses. GPC accredited, IPL & USPA approved/recognised.

Key features

• Oil-tanned Nubuck leather with gel-like compression feel

• 6″ (≈15 cm) wide back panel; contoured profile

• Shock-absorbing support across back & abdomen

• Reinforced stitching, rivets & heavy buckle

• Soft-to-skin finish; durable, gym-proof build

Build a stronger, more resilient neck and upper back with the RDX H2 Plus Head/Neck Harness—engineered for combat athletes and strength trainees who demand durability, comfort, and rock-solid stability under load. The H2 Plus targets the cervical flexors/extensors, upper trapezius and rhomboids, helping you develop the musculature that supports posture and absorbs impact—ideal for MMA, boxing, wrestling, rugby, and anyone chasing a bulletproof yoke.

A four-point, 4 D-ring layout gives you flexible loading options and smooth tracking during flexion, extension, and lateral movements. The 90 cm (35″) heavy-gauge steel chain handles serious weight and adjusts quickly for height or exercise changes. Industrial-grade nylon/neoprene with reinforced stitching balances lasting rigidity with padded comfort, including over-head and under-chin cushions that keep the harness anchored without hot spots. Three-way adjustable straps fine-tune fit across head shapes so sets feel secure, repeatable, and safe.

Use the harness to perform neck curls, extensions, laterals, shrugs, and sled drags, or as a posture corrector within a balanced upper-back program. Whether you’re warming up for sparring or adding finishing sets to a back day, the H2 Plus delivers consistent tracking and dependable load handling so you can focus on clean reps and progressive overload.

Key features

• 4 D-ring latches for versatile loading angles and smooth movement

• 90 cm (35″) heavy-gauge steel chain — adjustable length, high durability

• Nylon/neoprene construction with industrial stitching for longevity

• Three-way adjustable straps for a locked-in, personalised fit

• Under-chin & over-head padding to distribute pressure and boost comfort

How to use (quick start)

1. Fit & adjust: Place the harness over the crown, pad under the chin, tighten straps evenly.

2. Load: Clip plates/kettlebell to the chain; adjust chain length so the weight clears your chest.

3. Move slow: Keep torso braced; perform controlled flexion/extension or lateral reps—no jerking.

4. Progress: Start light (8–15 reps), add load gradually as control and ROM improve.

Care

Wipe down pads after training; air-dry fully. Do not machine wash. Inspect chain, rings, and stitching regularly; replace worn hardware promptly.

Safety note

Neck training is demanding—progress conservatively and avoid ballistic reps. If you experience pain, stop and seek professional guidance.

Built for serious lifters who still want day-in, day-out comfort, the RDX 4″ Leather Weightlifting Belt blends rugged materials with smart ergonomics to help you brace harder, lift safer, and perform better.

Why you’ll love it

• Real suede cowhide leather – tough, supportive and made to last. Suede finishes “bite” against clothing so the belt stays put as you set your brace.

• 4″ (10 cm) power belt profile – the sweet spot for most strength movements, offering broad lumbar and abdominal coverage without digging into ribs or hips.

• Carbon-fibre padded core – cushions the natural contour of your lower back and helps spread pressure evenly as you breathe and brace.

• QD-1 moisture-managing lining – wicks sweat so the belt feels drier and more hygienic through long sessions.

• Dual-prong, steel roller buckle – rock-solid hold with smooth tightening; reinforced with double stitching along the edges for long-term durability.

• Train everything – ideal for squats, deadlifts, presses, rows, strongman events, and general strength training.

How it helps your lifts

A lifting belt doesn’t “fix” technique; it amplifies a good brace. The 4″ width and semi-rigid leather let you press your abs 360° against the belt, increasing intra-abdominal pressure. That extra rigidity helps stabilise the spine under heavy loads so you can maintain better positions, grind through sticking points, and repeat quality reps with less fatigue through the trunk.

Fit & sizing guide

• Measure at the navel, not your jeans size. Use a tape around your abdomen where the belt will sit (usually just above the hip bones).

• If you’re between sizes, choose the larger belt to leave room for layering or intra-workout adjustments.

• Aim to have 2–3 holes of adjustment either side of your normal training tightness.

• Break-in: leather softens and conforms to you over the first few sessions—expect it to feel firmer out of the box.

Available colour: Black/Gold
Available sizes: S, M, L, XL, 2XL (see size selector)

Care & maintenance

Wipe the belt with a damp cloth after training and allow it to air-dry fully away from direct heat. Do not machine wash or soak. Occasional use of a leather conditioner on the outside can help keep the leather supple. Store flat or rolled loosely.

Who is it for?

Anyone chasing stronger main lifts who wants a belt that’s supportive without being unforgiving—from first-time belt users to veteran lifters. It’s an excellent choice for powerlifting-style training, bodybuilding, CrossFit® strength work, and general gym use.

FAQ

Is a dual-prong buckle better than single-prong?
Dual-prong buckles offer a very secure, even clamp across the strap. They can take a second longer to fasten than single-prong, but many lifters prefer the locked-in feel for heavy attempts.

Can I use it for competition?
The 4″ width is commonly accepted in many federations, but rules vary by organisation (and thickness limits may apply). Always check your federation’s equipment list before meet day.

Where should the belt sit?
Position it between ribs and hips. Most lifters place the buckle slightly off-centre to avoid contact with the bar during deadlifts. Tighten to a firm—but breathable—setting so you can still draw a big breath and brace hard against the belt.

Will it stop back pain?
A belt is a performance aid, not medical treatment. It helps reinforce a strong brace. If you have pain or injury, consult a professional.

How tight should I wear it for different lifts?
Many lifters go tighter for squats and deadlifts, slightly looser for pulls from blocks or overhead work. Experiment within the hole range that lets you breathe and brace effectively.